Godox Xpro-N TTL Wireless Flash Trigger for Nikon 1/8000s HSS i-TTL Function Transmiter for Nikon DSLR Camera
Free Shipping Included! Godox Xpro-N TTL Wireless Flash Trigger for Nikon 1/8000s HSS i-TTL Function Transmiter for Nikon DSLR Camera by GODOX at Kmpacting Studio. MPN: GD-Xpro-N. Hurry! Limited time offer. Offer valid only while supplies last. Specifications: Model: XProN Compatible cameras: Nikon series cameras (i-TTL autoflash)Support for the cameras that have PC sync socket. Power
Compatible cameras: Nikon series cameras (i-TTL autoflash)Support for the cameras that have PC sync socket.
Power supply: 2'AA batteries
TTL autoflash: i-TTL
Manual flash: Yes
Stroboscopic flash: Yes
High-speed sync : Yes
Second-curtain sync: Yes
Flash exposure compensation: Yes. 士3 stops in 1/3 stop increments
Flash exposure lock: Yes
Focus assist: Yes
Modeling lamp: Control the modeling lamp by the flash trigger
Beeper: Control the beeper by the flash trigger
Wireless setting: The receiver end can control the camera shooting through the 2.5mm sync cord jack
ZOOM setting: Adjust the ZOOM value by the transmitter
TCM function: Transform the TTL shooting value into the output value in the M node Firmware upgrade: Upgrade through the Type-C USB port
Memory function: Settings will be stored 2 seconds after last operation and recover after a restart
Transmission range (approx.) : 0-100m
Built-in wireless: 24G
Modulation mode: MSK
Wireless ID: 01-99
Display:Large LCD panel, backlighting ON or OFF
1* Godox XPro-N Wireless Flash Trigger
Features & Highlights
- Godox XPro-N TTL Wireless Flash Trigger can not only control the flashes with built-in Godox wireless X system, e g camera flashes, outdoor flashes and studio flashes, but also can control the Nikon original flashes when using in combination with X1R-N receiver
- Fully support TTL autoflash, 1/8000s high-speed sync, multi flash, manual flash, flash exposure compensation. TCM transform function, magnification function, one-shoot & multi- shoot setting, group modeling lamp control, group zooming, adjusting all groups1 output value simultaneously, etc.
- 16 groups and 32 channels to wirelessly control and trigger Add 01 to 99 wireless ID settings, which can only achieve triggering when the channels and wireless IDs of the master and slave unit are set to the same, avoiding signal interference effectively.
- Extra-large LCD panel, 5 group buttons and 4 function buttons offer convenient manipulation.
- Can be used on the following Nikon series camera models: D5 D4 D60 D70S D90 D100 D200 0300S D300 D500 D610 D7C0 D750D800 D810 D3100 D3200 D3300 D5000 D5100D5200 D5300 D7000 D7100
|Package Weight:||0.18 pounds|
|Package Size:||2.36 x 1.97 x 1.97 inches|